Amimon CONNEX Wireless HD Video Link for UAVs, 1080p60 Video Monitoring from the Air, HDMI Input and Output, Up to 1000m Line-of-Sight Range, Less Than 1 ms Latency, 5.8G Operation To Avoid Interference, Relays S.BUS-Based Gimbal Controls, Supports OSD for MAVLINK Telemetry, AES128/RSA1024 Video Encryption, Includes Mounting Hardware and Cables, Supports Up to Four Receivers
Warning: Last items in stock!
Whereas traditional 5.8G analog systems limit you to SD resolution, with the CONNEX Wireless HD Video Link for UAVs from Amimon , you will be able to view a live, near-zero latency, feed from a UAV-mounted camera at up to 1080p60 resolution. Suitable for monitoring, FPV, and gimbal operation, the system features a range of up to 3300' line-of-sight (depending on conditions). It incorporates an S.BUS relay so that gimbal controls for S.BUS-compatible gimbals can be relayed to back to the aircraft (gimbal remote available separately), and can display OSD data from MAVLINK telemetry modules (telemetry system available separately). The video transmission in encrypted to help prevent eavesdropping. The transmitter can link to up to four receivers, for example allowing the pilot and camera operator to each have their own monitor or FPV goggles (additional receivers available separately).
Cables and mounting hardware are included. The air unit is designed to power from the flight battery, while the ground unit includes an AC adapter. The ground unit can also power from a separately available 7 to 19 VDC source for added flexibility in the field.
Plug & Fly
CONNEX is designed to setup and get you working out of the box - no complicated binding procedures here
Full HD Resolution
Unlike analog systems, which limit you to SD resolution, the digital CONNEXT system provides support for up to 1080p60
Virtually no Latency
Featuring less than 1 ms of latency, the CONNEX does not buffer or hold your video, so that you can see and control what's happening live. Use CONNEX video to help you fly, aim the camera, or operate the gimbal
5.8G ISM Band Operation
CONNEX uses the 5.1 to 5.8 GHz frequency range to avoid interfering with aircraft control systems, which are usually 2.4 GHz. Automatic Frequency Selection (AFS) will choose the best available channel to be used, and will move seamlessly to an alternative channel on-the-fly if needed
CONNEX is able to relay the control signal for an S.BUS-based gimbal mounted on the UAV. Using Futaba S.BUS from the remote control, you can use CONNEX to simultaneously get video from the drone and control the gimbal on it
OSD (On-Screen Display) Overlay
CONNEX On-Screen-Display (OSD) is a great way to see your flight status. The OSD shows both information about your wireless link status, and MAVLINK-based telemetry from your UAV flight controller
Note: MAVLINK telemetry system required to supply OSD data (available separately)
CONNEX employs AES128 for the video encryption and RSA1024 for key exchange to help ensure no one unauthorized is able to intercept your video feed
|Range||3300' / 1000m (outdoor; line-of-sight)|
|Latency||> 1 ms|
|Frequency||5.1 to 5.8 GHz|
|Channel Selection||Automatic frequency selection (AFS)|
|Multicast Mode||Up to 4 receivers with no delay or quality degradation (requires separately available additional ground unit(s))|
|Encryption||AES-128 and RSA 1024 for key exchange|
|Video Formats Supported|
|Resolutions||1080p: 60, 50, 30, 25, 24|
1080i: 60, 50 525i: 60 (NTSC)
|OSD Support||MAVLINK telemetry-based|
1 x mini HDMI
1 x HDMI (Type A)
2 x MMCX
5 x SMA
8 to 26 VDC (3S to 6S)
7 to 19 VDC
|Operating Temperature||32 to 113°F / 0 to 45°C|
4 x 2.5 x 0.6" / 102 x 63.6 x 15.6 mm
5.1 x 3.5 x 0.8" / 129 x 89 x 20 mm
4.6 oz / 130 g
9.2 oz / 260 g
|Alimentazione||presa DC Φ 2.5|
No customer comments for the moment.
Deluxe SDI | HDMI Wireless Video Tranceiver Set - V Mount 1000ft
Deluxe SDI | HDMI Wireless Video Tranceiver Set - 2 x RX V Mount 1000ftl
SDI Wireless Video Transmitter - 3000ft
Swit Sistema di trasmissione HD wireless 5.1-5.9GHz license-free non...
TERADEK Bolt XT 500 Wireless SDI/HDMI Transmitter/Receiver Set, backward...
TERADEK Bolt XT 500 Wireless SDI/HDMI Transmitter, backward compatible with...
TERADEK Bolt XT 500 Wireless SDI/HDMI Transmitter/2x Receiver Set, backward...
TERADEK Bolt XT 1000 Wireless SDI/HDMI Transmitter/Receiver Set, backward...
TERADEK Bolt XT 1000 Wireless SDI/HDMI Receiver, backward compatible with 3rd...
TERADEK Bolt XT 3000 Wireless SDI/HDMI Transmitter/Receiver Set, backward...
TERADEK Bolt XT 3000 Wireless SDI/HDMI Receiver, compatible with 3rd...
TERADEK Bolt XT Sidekick 500 Universal Wireless Receiver, 500 ft wireless...
TERADEK Bolt XT 500 Wireless SDI/HDMI Transmitter/Receiver Deluxe Kit V...
TERADEK Bolt XT 500 Wireless SDI/HDMI Transmitter/2x Receiver Deluxe Kit AB...
TERADEK Bolt XT 1000 Wireless SDI/HDMI Transmitter/Receiver Deluxe Kit AB...
TERADEK Bolt XT 1000 Wireless SDI/HDMI Transmitter/Receiver Deluxe Kit V...
TERADEK Bolt XT 1000 Wireless SDI/HDMI Transmitter/2x Receiver Deluxe Kit AB...
TERADEK Bolt XT 1000 Wireless SDI/HDMI Transmitter/2x Receiver Deluxe Kit V...
TERADEK Bolt XT 3000 Wireless SDI/HDMI Transmitter/Receiver Deluxe Kit AB...
TERADEK Bolt XT 3000 Wireless SDI/HDMI Transmitter/2x Receiver Deluxe Kit AB...
TERADEK Bolt XT 3000 Wireless SDI/HDMI Transmitter/2x Receiver Deluxe Kit V...
TERADEK Bolt XT 3000 Transmitter/Receiver Set + Bolt 10K HD-SDI/HDMI Deluxe...