Tascam ML-16D Dante / Analog Converter

ML-16D

Nuovo

Tascam ML-16D Dante / Analog Converter, For External Audio, In or Out of Dante, 16-Channel Inputs and Outputs, 24-Bit, 48 kHz / 96 kHz Format, 4x D-Sub Connectors, LED Display for Signal Levels

Maggiori dettagli

Disponibile 2/3gg

Puoi acquistare questo prodotto a rate tramite Consel. Clicca qui per maggiori informazioni.


€ 1.290,00
€ 1.057,38 + IVA

Aggiungi alla mia lista dei desideri

The ML-16D Dante / Analog Converter from Tascam is a Dante-focused converter designed to insert or extract analog audio into or out of a Dante (Digital Audio Network Through Ethernet) network using external breakout devices that utilize D-Sub format connectors.

The Tascam ML-16D has two D-Sub inputs and two D-Sub outputs, that can be used to connect several devices that utilize D-Sub connectors such as microphone preamplifiers, console mixers, audio interfaces, amplifiers, and other audio devices.

Furthermore, the Dante protocol provides uncompressed, multi-channel, low-latency digital audio over a standard Ethernet network and supports up to 1024 channels of 32-bit / 192 kHz audio over a Cat 5/6 Ethernet system.

 

 

Dante-focused interface for connection of external audio in or out of a Dante audio network.
16-channel analog line input and 16 analog line outputs (48 kHz / 96 kHz) using 4 D-Sub connectors.
Dual redundant Ethernet jacks which support both primary and secondary connections.
Up to 24-bit / 96 kHz quality.
LED display for signal level and overload per input/output channel.
Reference level dip switches for selectable dBu level metering.
Firmware updatable via Dante port.
AES67 and Revenna compatible.

 

 

Tascam ML-16D Specs

 

Channels of I/O16
Formats Supported44.1/48 kHz, 16/24-bit
88.2/96 kHz, 16/24-bit
Primary ConnectorsRJ-45
Transmission Protocol: Dante
Gigabit Ethernet Standard: 1000 BASE-T (IEEE 802.3 ab)
Cables: Category 5e or faster STP cables
Analog OutputsConnector: 4x D-Sub 25-pin
Locking Screws: No. 4-40 UNC (inch type)
Nominal Output Levels: +4 dBu, +6 dBu (only when maximum output level is +15 dBu)
Maximum Output Levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by Ref. level switches)
Output Impedance: 200 Ohms or lower
Applicable Load Impedance: 2 kOhms or higher
Analog InputsConnector: 4x D-Sub 25-pin
Locking Screws: No. 4-40 UNC (inch type)
Nominal Output Levels: +4 dBu, +6 dBu (only when maximum output level is +15 dBu)
Maximum Input Levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by Ref. level switches)
Input Impedance: 10 kOhms or higher
* 0 dBu=0.775 Vrms
Audio Performance
Frequency Response+0.1 dB/-0.5 dB: 20 Hz / 20 kHz (-16 dBFS input, 44.1/48 kHz sampling frequency, JEITA)
+0.1 dB/-0.5 dB: 20 Hz / 40 kHz (-16 dBFS input, 88.2/96 kHz sampling frequency, JEITA)
Total Harmonic Distortion (THD) + N0.001% or less (-1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
Signal to Noise Rate113 dB or higher (44.1/48/88.2/96 kHz sampling frequency, JEITA)
Cross Talk115 dB or higher (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
Dante Network
Frequency Response+0.1 dB/-0.5 dB: 20 Hz/20 kHz (-16 dBFS input, 44.1/48 kHz sampling frequency, JEITA)
+0.1 dB/-1.0 dB: 20 Hz/40 kHz (-16 dBFS input, 88.2/96 kHz sampling frequency, JEITA)
Total Harmonic Distortion (THD) + N0.001% or less (-1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
Signal to Noise Ratio110 dB or higher (44.1/48/88.2/96 kHz sampling frequency, JEITA)
Crosstalk115 dB or higher (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
Other Features
PowerAC100 to 240 VAC, 50/60 Hz
Power Consumption22 W
Dimensions (W x H x D)19.0 x 1.8 x 12.0" (483 x 45 x 303.8 mm)
Operating temperature32 to 104°F (0 to 40°C)
Weight7.7 lb (3.5 kg)

 

Non ci sono commenti dei clienti per il momento.

Scrivi una recensione

Tascam ML-16D Dante / Analog Converter

Tascam ML-16D Dante / Analog Converter

Tascam ML-16D Dante / Analog Converter, For External Audio, In or Out of Dante, 16-Channel Inputs and Outputs, 24-Bit, 48 kHz / 96 kHz Format, 4x D-Sub Connectors, LED Display for Signal Levels

Scrivi una recensione

Prodotti Correlati