RCP-V1.0-JOY, Skaarhoj RCP panel for CCU control of BlackMagic URSA Mini and Studio Camera series in a Sony form factor, Shading your BlackMagic Camera with HardwareRCP panel for CCU control of BlackMagic URSA Mini and Studio Camera series in a Sony form factor
Disponibile in 3/4gg
Attenzione: Ultimi articoli in magazzino!
CCU control of BlackMagic Design cameras has been notoriously difficult through software only. We have already specialised in CCU control of multiple cameras (ATEM CCU & ATEM CCU Lite) but now we present a Sony form factor remote control panel (RCP) for BlackMagic Cameras, such as the URSA Mini and the Studio Camera series. The RCP even allows you to control cameras without the need of an ATEM switcher thanks to the BMD Arduino Shield inside.
CCU controls BlackMagic URSA Mini or Studio Camera series compatible camera ("BlackMagic Video Device Embedded Control Protocol" must be supported on SDI return feed)
Familiar CCU operation via a single axis joystick iris control with master black wheel and top push button
Fits in your existing OB van rack with a Sony RCP Form Factor (4"/102mm wide)
Embeds CCU data on the 3G-SDI return feed via a BlackMagic Design Arduino Shield. Alternatively, sends CCU data via a BlackMagic ATEM Switcher (currently subject to limitation in connected ATEM clients)
Customize the RCP to your liking via the awesome new SKAARHOJ UniSketch web interface (all RCP interface components included!)
Use a BlackMagic Design Videohub or ATEM switcher AUX output to control CCU operator monitor via joystick push button
Connect external trigger and control external devices with the DB-9 "EXT I/O" relay output and GPI trigger connector
Clear ID indication with large 8 character Camera ID display featuring Tally-colored backlight
Shade with dedicated encoder knobs for lift, gamma and gain
Access other camera settings like shutter speed, sensor gain, contrast, saturation, details etc.
Advanced functions like "Active Panel", "Relative" and limits functions
Awesome overview of encoder settings with the very crisp 256x64 pixel OLED display
Store and recall settings with 4 scene stores and dedicated control buttons
Blackmagic Arduino Shield embeds CCU data on the 3G-SDI return feed
BlackMagic 3G-SDI Arduino Shield
On the backside of the controller, you find a 3G-SDI in and out BNC plug. Route the return feed to the camera through this connection to insert CCU data on the signal.
If you use the BlacMagic 3G-SDI Arduino Shield for camera control the following output formats are supported: 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94 and 1080p60.
The RCP controls any BlackMagic camera that supports CCU over the return SDI feed. This includes the Micro Studio Camera 4K, Studio Cameras and the URSA Mini. The CCU data is inserted on the SDI return feed.
Sony Form Factor same dimensions as a Sony RCP-1500 series
It has the same form factor as a Sony RCP-1500 series, so it will fit into your OB van. Here are the dimensions of the Sony RCP taken from their manual.
CCU joystick with master black wheel and push button on top
10 rotary encoders
16 x 12 mm buttons for system control
3 x 12 mm bi-color buttons for InActive, Relative, Auto Iris
1 x 17.4 mm button for preview toggle
256x64 pixel crisp OLED display for overview of encoder settings
ID indication with large 8 character camera ID display
Miniature high contrast 128x32 OLED display, white on black
Same form factor as the Sony RCP-1500 series
Controls camera via ATEM or via BlackMagic Arduino Shield
UniSketch web interface for extensive configuration
Enclosure Size 10.2 x 35.5 x 13.5 cm (top of joystick)
Weight 1.160 kg
Non ci sono commenti dei clienti per il momento.
MCU-100 Multi-Camera Control Unit può essere utilizzato per impostare in...
Il controller Datavideo MCU-200 può essere utilizzato per impostare in remoto...
Skaarhoj RCPv2 - the world’s most flexible RCP just got better. Fits into...
SKAARHOJ PTZ Vola un controller compatto con un joystick a tre assi di...