Yamaha MG06X - 6-Input Mixer with Built-In Effects

MG06X

Nuovo

Yamaha MG06X, 6 Channel Mixer, 2 Mic Inputs with "D-PRE" Microphone pre amps with an Inverted Darlington Switching circuit (XLR/1/4" Jack) with +48V Phantom power, 2 Band EQ, High-Pass Filter and 26dB Pad Switch, built in FX with 6 Parameters, 2 Stereo Inputs (1/4" Jack), XLR Out, dimensions 149 x 62 x 202mm, weight 0,9 Kg

Maggiori dettagli

€ 139,00
€ 113,93 + IVA

Aggiungi alla mia lista dei desideri

The MG06X from Yamaha is a compact six-input mixer with built-in effects for small performances, lectures, recordings and similar applications. The mixer features two mic/line combo inputs with D-PRE mic preamps as well as four 1/4" line inputs with stereo level controls.

 

Each of the two mic/line inputs is equipped with a 2-band EQ and a high pass filter at 80Hz. The D-PRE mic preamps feature an inverted Darlington circuit and switchable 48V phantom power for use with dynamic and condenser microphones. They also each feature 26dB attenuation switches for recording loud sound sources such as guitar amplifiers.

 

The MG06X mixer has stereo XLR outs for connecting to your PA system or monitor speakers. It also has a 1/4" headphone output with level control for personal monitoring, as well as TRS 1/4" stereo outs for sending to powered speakers, amplifiers or devices such as digital recorders.

 

The mixer's built-in effects can be engaged on the two mic/line combo inputs and they feature reverb and delay. Providing three reverb and three delay settings plus a dedicated FX return level control, these effects can be used to help vocals and instruments sit better in your mix.

 

Mono/stereo switch allows channels 1/2 to be used with two mono sources or one stereo source
Metal chassis designed to withstand wear and tear
Optional BMS10A microphone stand adapter (sold separately) allows mounting


SPECS


Built-in Effects SPX algorithm: 6 programs (3 reverb, 3 delay)
Phantom Power +48 V switchable, channels 1, 2
Input Channels 2x mono [mic/line]
2x stereo [line]
Output Channels 2x stereo out
1x headphone
Bus 1x stereo
Pad 26 dB (mono channels)
HPF 80 Hz, 12 dB/oct (mono channels)
Equalizer EQ high (mono channels) gain: +15 dB/-15 dB, Frequency: 10 kHz shelving

EQ low (mono channels) gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
LED Peak LED turns on when post EQ signal reaches 3 dB below clipping
Level Metering 2 x 7-segment LED meter [PEAK, +6, +3, 0, -3, -10, -20 dB]
Total Harmonic Distortion 0.01% @ +8 dBu (20 Hz to 20 kHz), GAIN knob: min, 0.003% @ +18 dBu (1 kHz), GAIN knob: min
Frequency Response +0.5 dB/-0.5 dB (20 Hz to 20 kHz), refer to the nominal output level @ 1 kHz, GAIN knob: min
Equivalent Input Noise -128 dBu (mono input channel, Rs: 150 Ω, GAIN knob: max)
Residual Output Noise -102 dBu (STEREO OUT, STEREO LEVEL knob: min)
Crosstalk -88 dB
Power Requirement PA-130 (DC12 V/1.0 A, Cable length = 1.8 m), 120 V, 60 Hz, MU18 (DC12 V/1.5 A, cable length = 1.5 m), 100-240 V, 50/60 Hz or equivalent recommended by Yamaha
Power Consumption 12 W
Dimensions 5.9 x 2.4 x 7.9" (149 x 62 x 202 mm)
Net Weight 1.98 lb (0.9 kg)

Non ci sono commenti dei clienti per il momento.

Scrivi una recensione

Yamaha MG06X - 6-Input Mixer with Built-In Effects

Yamaha MG06X - 6-Input Mixer with Built-In Effects

Yamaha MG06X, 6 Channel Mixer, 2 Mic Inputs with "D-PRE" Microphone pre amps with an Inverted Darlington Switching circuit (XLR/1/4" Jack) with +48V Phantom power, 2 Band EQ, High-Pass Filter and 26dB Pad Switch, built in FX with 6 Parameters, 2 Stereo Inputs (1/4" Jack), XLR Out, dimensions 149 x 62 x 202mm, weight 0,9 Kg

Scrivi una recensione

Prodotti Correlati