Yamaha MG10 - 10-Input Mixer

MG10

Nuovo

Yamaha MG10, 10 Channel Mixer, 4 Mic Inputs with "D-PRE" Microphone pre amps with an Inverted Darlington Switching circuit(XLR/1/4" Jack) with +48V Phantom power, 2 Band EQ, High-Pass Filter and 26dB Pad Switch, 3 Stereo Inputs (1/4" Jack), XLR Out, 1 Aux for all Channels, dimensions 244 x 71 x 294mm, weight 1,9 Kg

Maggiori dettagli

Disponibile in 2/3gg

€ 149,00
€ 122,13 + IVA

Aggiungi alla mia lista dei desideri

The MG10 from Yamaha is a compact ten-input mixer for performances, lectures, recordings and similar applications. The mixer features four mic/line combo inputs with D-PRE mic preamps as well as six 1/4" line inputs with stereo level controls.

 

Each of the four mic/line inputs is equipped with a 3-band EQ, pan control and a high pass filter. The four D-PRE mic preamps feature an inverted Darlington circuit and switchable 48V phantom power for use with dynamic and condenser microphones. They also each feature 26dB attenuation switches for recording loud sound sources such as guitar amplifiers.

 

The MG10 mixer has stereo XLR and TRS outs for connecting to your PA system or monitor speakers. It also has a 1/4" headphone output with level control for personal monitoring, as well as additional TRS 1/4" stereo monitor outs for sending to powered speakers, amplifiers or devices such as digital recorders.

 

Three stereo channels made up of six 1/4" line inputs (two stereo channels also have RCA inputs)
3-band EQ on channels 1-4 and 2-band EQ on channels 5-10
Pan control on each channel
Aux level on each channel feed to TRS aux send for routing to devices such as reverb units
One knob compressor on channels 1 & 2 to smooth out the dynamics of vocals and instruments to help them sit better in your mix
Optional BMS10A microphone stand adapter (sold separately) allows mounting


SPECS


Phantom Power +48 V switchable, channels 1 - 4
Input Channels 4x mono [mic/line]
3x stereo [line]
Output Channels 2x stereo out
1x monitor out
1x headphone out
1x aux out
Bus Stereo: 1
AUX[FX]: 1
Pad 26 dB (mono channels)
HPF 80 Hz, 12 dB/oct (mono channels)
Compressor Threshold: +22 dBu to -8 dBu
Ratio: 1:1 to 4:1
Output level: 0 dB to 7 dB
Attack time: approx. 25 msec
Release time: approx. 300 msec
Equalizer EQ high gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
EQ mid gain: +15 dB/-15 dB, Frequency: 2.5 kHz peaking
EQ low gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
LED Peak LED turns on when post EQ signal reaches 3 dB below clipping
Level Metering 2 x 7-segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB]
Total Harmonic Distortion 0.02% @ +14 dBu (20 Hz to 20 kHz), GAIN knob: Min, 0.003% @ +24 dBu (1 kHz), GAIN knob: min
Frequency Response +0.5 dB/-1.0 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: min
Equivalent Input Noise -128 dBu (mono input channel, Rs: 150 Ω, GAIN knob: max)
Residual Output Noise -102 dBu (STEREO OUT, STEREO LEVEL knob: min)
Crosstalk -83 dB
Power Requirement PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha
Power Consumption 22.9 W
Dimensions 9.6 x 2.8 x 11.6" (244 x 71 x 294 mm)
Net Weight 4.19 lb (1.9 kg)

Non ci sono commenti dei clienti per il momento.

Scrivi una recensione

Yamaha MG10 - 10-Input Mixer

Yamaha MG10 - 10-Input Mixer

Yamaha MG10, 10 Channel Mixer, 4 Mic Inputs with "D-PRE" Microphone pre amps with an Inverted Darlington Switching circuit(XLR/1/4" Jack) with +48V Phantom power, 2 Band EQ, High-Pass Filter and 26dB Pad Switch, 3 Stereo Inputs (1/4" Jack), XLR Out, 1 Aux for all Channels, dimensions 244 x 71 x 294mm, weight 1,9 Kg

Scrivi una recensione

Prodotti Correlati