Ikan DS2-A Beholder Angled 3-Axis Gimbal Stabilizer w/ Encoders

DS2-A

Nuovo

The Beholder DS2-A, Works with DSLR & Mirrorless Cameras Under 1.8Kg, Durable All Aluminum Construction, 360 Degree Movement on Pan Axis, Equipped with 3 Axis Gyro Stabilized Brushless Motors, OLED Display Screen to Show Operating Modes, Equipped with 32-Bit Controller & 12-Bit Encoder, Lithium Battery Powered- Low Maintenance

Maggiori dettagli

Disponibile

Puoi acquistare questo prodotto a rate tramite Consel. Clicca qui per maggiori informazioni.


€ 731,99
€ 599,99 + IVA

-20%

Invece di € 914,99

Aggiungi alla mia lista dei desideri

The Beholder DS2-A is designed specifically for professional filmmakers looking for a single handheld stabilizer for a large range of small cameras weighing up to 1.8Kg. The DS2-A features a unique angled roll motor arm, which allows you to have a better view of the camera’s screen while using the gimbal. In addition, the DS2-A also features a 60 second Auto-Sweep mode, which allows you to program a 60 second camera movement. The Beholder DS2-A is lightweight, easy to use, and can be carried in your camera bag. It is also versatile enough to be used with a DSLR, mirrorless camera, GoPro, or smartphone.

 

Point & Lock
Angled Motor Arm
The DS2-A is the first Ikan Beholder gimbal to feature an angled roll motor arm that gives you a better view of the camera’s screen. This makes it easier to frame your shots and follow the action.

 

360° Motors
The DS2-A features a 360 degree rotation brushless motor on the yaw axis for a higher range of mobility.
360 Motors

 

Designed for DSLR and Mirrorless Cameras
With a payload of up to 4 lbs. the DS2-A has the ability to stabilize a wide range of today’s popular DSLR & mirrorless cameras including the Canon 5D Mark IV, Canon 6D, Canon 7D, Sony a6300, Sony a7SII, Panasonic GH5, GoPro, or smartphone.

Advanced Stabilization
Using a 32-bit controller with a 12-bit encoder, the DS2-A uses an adaptive PID algorithm to produce an efficient handheld stabilizer. This means that the gimbal will respond faster, balance easier, and have greater battery life.
Advanced Stabilization

 

Lock Mode
In Lock Mode, the yaw, pitch, and roll axis work together to keep the camera pointed in one direction. The camera's composition will stay the same no matter how you move the handle.

Quickly lock your camera into any position by manually pointing and holding it in any direction. After a few seconds, the camera will lock and hold its position until it is reset back to default.


Auto Inversion
Switch to Inverted Mode at any time by simply flipping the handle over the camera. Inverted Mode can be operated in conjunction with any of the Lock and Follow Modes.



Multiple Follow Modes
The DS2-A features 3 different follow modes. In Yaw-Axis Follow Mode, the DS2-A will only follow your pan movements. In Pitch and Yaw-Axis Follow mode, the DS2 will follow your pan and tilt movements. Finally, the 3-Axis Follow Mode gives you full control allowing you to pan, tilt, and roll.

60 Second Auto-Sweep
The DS2 has a 60 second auto-sweep feature that allows you to program a 60 second movement. Position the camera at the end point, and then press the mode button 5 times. Then, position the camera at the start point and let the DS2 do the rest! The camera will move from one point to the other in a 60 second time frame.
60 Second Auto-Sweep


OLED Status Display
A display screen located on the handle conveniently provides you with the battery life and current operating mode.

 

Easy to Use
With a newly designed quick-release baseplate system, the DS2-A is easy to balance without any tools.

Multiple Mounting Options
The DS2-A handle comes with two 1/4”-20 mounts that are perfect for mounting accessories such as a light, microphone, or monitor. A 3/8”-16 thread located on the bottom allows you to securely mount the DS2-A to a tripod, jib, or dual handle support system such as the Ikan DGH.
Multiple Mounting OptionsMultiple Mounting Options

 

WHAT'S INCLUDED:

1 X Battery Cap With 3/8-16 Mount (Pre-Assembled)
1 X Battery Holder (Pre-Assembled)
1 X DS2-A Gimbal Stabilizer
1 X Instruction Manual
1 X Micro USB AC Adapter
1 X Quick Release Plate (Pre-Assembled)
1 X Travel Case
3 X 18650 Batteries

 

DOWNLOADS:


DS2-A One Sheet

 

SPECIFICATIONS:


Battery Charge Time:3 - 4 Hours
Battery Operating Time:8-10 Hours
Battery Stand By Time:Up to 20 Hours
Battery Type:18650, 3.7V, 2600mAh, Li-Ion Batteries
Camera Compatibility:Mirrorless and DSLR Cameras
Payload:4 lbs (1800 g)
Shipping Dimensions:15.1 x 9.0 x 2.9 in.
Shipping Dimensions (Metric):38.4 x 22.8 x 7.4 cm
Shipping Weight:5 lbs
Shipping Weight (Metric):2.3 kg
UPC Code:847983022724
Working Angle (Pan Motor):360°
Working Angle (Roll Motor):310°
Working Angle (Tilt Motor):310°

 

Non ci sono commenti dei clienti per il momento.

Scrivi una recensione

Ikan DS2-A Beholder Angled 3-Axis Gimbal Stabilizer w/ Encoders

Ikan DS2-A Beholder Angled 3-Axis Gimbal Stabilizer w/ Encoders

The Beholder DS2-A, Works with DSLR & Mirrorless Cameras Under 1.8Kg, Durable All Aluminum Construction, 360 Degree Movement on Pan Axis, Equipped with 3 Axis Gyro Stabilized Brushless Motors, OLED Display Screen to Show Operating Modes, Equipped with 32-Bit Controller & 12-Bit Encoder, Lithium Battery Powered- Low Maintenance

Scrivi una recensione

Prodotti Correlati