Teradek Bolt 4K 1500 12G-SDI/HDMI Wireless Video Kit

TER-10-2110

Nuovo

Bolt 4K 1500 12G-SDI/HDMI Wireless TX/RX - Range 450m, Bolt 4K 1500 TransmitterBolt 4K 1500 ReceiverSupports Up to 4K Resolution at 60 fpsUp to 1500' Range (Line-of-Sight)12G-SDI & HDMI 2.0 Inputs/OutputsTransmitter Supports Up to Six ReceiversNine 2 dBi Wi-Fi Antennas IncludedLarge Case Included

Maggiori dettagli

€ 8.225,85
€ 6.742,50 + IVA

Aggiungi alla mia lista dei desideri

Real-Time 4k wireless video 

Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 1500 ft. of range.

True HDR colour 

Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.

Rock- solid reliability 

Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.

Universal compatibility 

Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.

INPUTS/OUTPUTS

Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.

Receiver: 2x 12G-SDI, 1x HDMI 2.0

BATTERY PLATES

Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.

Camera Metadata

Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.

Bolt App for IOS

Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.

Features:

Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay

Up to 1500 ft. of range

Each transmitter can send video to up to 6 receivers

Transmitter Inputs / Outputs: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output

Receiver Inputs / Outputs: 2x 12G-SDI, 1x HDMI 2.0

Compatible with any model in the Bolt 4K line

Specifications:

BOLT 4K 1500 TX NO MOUNT

Video Inputs

1 x 12G-SDI SMPTE 2082-1 standard / 75 Ω (accepts 12G- SDI, 6G-SDI, or 3G-SDI)

1 x HDMI Type-A receptacle accepts HDMI 2.0 or HDMI 1.4)

Video Outputs 1 x Loopout 12G-SDI SMPTE 2082-1 standard / 75 Ω

Sdi Ancillary Data Support Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers.

Colour Sampling SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit

Input Cross Conversion Yes, HDMI to SDI

Delay Tx To Rx <0.001sec

 

Supported Resolutions

4Kp23.98/24/25/29.97/30/50/59.94/60

1080p23.98/24/25/29.97/30/50/59.94/601080psf23.98/24/25/29.97/30

1080i50/59.94/60

720p50/59.94/60

480p50 576p59.94/60

480i(NTSC)/576i(PAL)

 

Video Compression Visually Lossless

Video Format Conversion Support

Connect an HD source to the Tx and get a 4K signal out of Rx

Connect a 4K source to the Tx, get HD resolution out of Rx

You can also mix & match from a single source:

4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx

Input/output configurations are controlled directly on units or via Bolt 4K app

 

Colour Correction None

Audio Format 48kHz 24-bit PCM

Audio Input Embedded SDI/HDMI Audio Input (2 Channel)

Dimensions 132 x 91 x 27 mm

Weight

Bolt 4K Tx without antennas (no battery plates) = 360g

Bolt 4K Tx with 4x antennas (no battery plates) = 408g

Bolt 4K Rx without antennas (no battery plates) = 440g

Bolt 4K Rx with 5x antennas (no battery plates) = 496g

Gold-Mount battery plate set (male+female) = +172g

V-Mount battery plate set (male+female) = +220 g

 

Construction Milled Aluminum(Chassis) and regulation-compliant PCB

Mountability Multiple mounting options with 1/4"x20 and M3 holes

Configuration Interfaces OSD with Menu, Joystick Navigation

Switches On/Off Switch

USB Interface Functionality Upgrade via Micro-USB

Antennas 4 External 2dBi RP-SMA antennas (included)

Wireless

Non-DFS Frequencies:5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz

DFS Frequencies: 5.270 ~ 5.670 GHz

Channel Bandwidth 14x 40MHz wide channels

Rf Channel Selection Auto, Manual, Manual available for non-DFS Channels

Encryption AES-256, RSA-1024 key exchange

Rf Power 19 dbm EIRP (4 external 2dBi antennas) (<80mW transmit power)

Range Up to 1500 ft, line of sight

Unicast Multicast Can connect one Transmitter to up to 6 Receivers

Noise Rejection Can coexist with WiFi and 5GHz cordless phones, Can operate up to 6 sets in same location

Power Input 2-Pin Circular locking Connector 6-28V DC

Battery None, optional Gold or V mount battery plate

Nominal Power Consumption 20 Watts

Operating Temperature 0-40℃

BOLT 4K 1500 RX NO MOUNT

Video Outputs

2 x 12G-SDI SMPTE 2082-1 standard / 75 Ω (accepts 12G- SDI, 6G-SDI, or 3G-SDI), 1 x HDMI Type-A receptacle accepts HDMI 2.0 or HDMI 1.4)

Sdi Ancillary Data Support Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers.

Colour Sampling SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit

Input Cross Conversion Yes, HDMI to SDI

Delay Tx To Rx <0.001sec

Supported Resolutions

4Kp23.98/24/25/29.97/30/50/59.94/60

1080p23.98/24/25/29.97/30/50/59.94/60

1080psf23.98/24/25/29.97/30

1080i50/59.9 4/60

720p50/59.94/60

480p50 576p59.94/60

480i(NTSC)/576i(PAL)

Video Processing Visually Lossless

Video Format Conversion Support

Connect an HD source to the Tx and get a 4K signal out of Rx

Connect a 4K source to the Tx, get HD resolution out of Rx

You can also mix & match from a single source:

4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx

Input/output configurations are controlled directly on units or via Bolt 4K app

Colour Correction 17x17x17 3D LUT (supports 10-bit colour)

Audio Format 48kHz 24-bit PCM

Audio Output Embedded SDI/HDMI Audio Output (2 Channel)

Dimensions 112 x 139 x 27 mm

Weight

Bolt 4K Tx without antennas (no battery plates) = 360g

Bolt 4K Tx with 4x antennas (no battery plates) = 408g

Bolt 4K Rx without antennas (no battery plates) = 440g

Bolt 4K Rx with 5x antennas (no battery plates) = 496g

Gold-Mount battery plate set (male+female) = +172g

V-Mount battery plate set (male+female) = +220 g

Construction Milled Aluminum(Chassis) and regulation-compliant PCB

Mountability Multiple mounting options with 1/4"x20 and M3 holes

Configuration Interfaces OSD with Menu, Joystick Navigation

Switches On/Off Switch

Usb Interface Functionality Upgrade via Micro-USB

Antennas 5 External 2 dBi antennas (included) or optional Array Panel Antenna

Wireless

Non-DFS Frequencies:

5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz

DFS Frequencies:

5.270 ~ 5.670 GHz

Channel Bandwidth 14x 40MHz wide channels

Rf Channel Selection Auto, Manual, Manual available for non-DFS Channels

Encryption AES-256, RSA-1024 key exchange

Rf Power 17 dbm EIRP (one external 2dBi antenna) (<51mW transmit power)

Range Up to 1500 ft, line of sight

Unicast Multicast Can connect one Transmitter to up to 6 Receivers

Noise Rejection Can coexist with WiFi and 5GHz cordless phones

Can operate up to 6 sets in same location

Power Input 2-Pin Circular locking Connector 6-28 VDC

Battery None, optional Gold or V mount battery plate

Nominal Power Consumption 18 Watts

Operating Temperature 0-40℃

Non ci sono commenti dei clienti per il momento.

Scrivi una recensione

Teradek Bolt 4K 1500 12G-SDI/HDMI Wireless Video Kit

Teradek Bolt 4K 1500 12G-SDI/HDMI Wireless Video Kit

Bolt 4K 1500 12G-SDI/HDMI Wireless TX/RX - Range 450m, Bolt 4K 1500 TransmitterBolt 4K 1500 ReceiverSupports Up to 4K Resolution at 60 fpsUp to 1500' Range (Line-of-Sight)12G-SDI & HDMI 2.0 Inputs/OutputsTransmitter Supports Up to Six ReceiversNine 2 dBi Wi-Fi Antennas IncludedLarge Case Included

Scrivi una recensione

Prodotti Correlati