Teradek Ranger 4K Receiver 4K 12G-SDI/HDMI Wireless RX - V-Mount

Next-Level wireless performance
Ranger is the world’s first zero-delay (< 1 ms) wireless video system to transmit uncompressed 4K HDR video up to 5,000 ft. line of sight. With best-in-class performance in challenging RF conditions and a wide operating range from 4.9 GHz to 6.0 GHz, Ranger offers live productions the ultimate combination of incredible video quality and wireless integrity.

Power through interference
Teradek's patented Joint Source Channel Coding (JSCC) technology, utilizing MIMO and OFDM, enables the transmission of uncompressed, 10-bit, 4:2:2 video at less than 1 millisecond of delay. Ranger’s exclusive RF design is UNII-5 ready and utilizes 40 MHz / 20 MHz channels with far greater efficiency than H.264 / HEVC encoding solutions and offers better performance in the noisiest environments.

Easy smartphone configuration
Command your wireless workflow from the palm of your hand with the Launchpad app for iOS and Android. Pair transmitters and receivers with the touch of a button, monitor channel interference, and set operating frequencies directly from the app, no cables needed.

Unbreakable Encryption
Ranger offers the industry’s best protection against prying eyes with AES-256 encryption using RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.

Features

Wireless 4K (2160p60) HDR video
Zero-delay (< 1 ms)
Uncompressed, 10-bit, 4:2:2 image quality
Directional antenna for superb wireless performance
Up to 3,000 ft. of wireless range or 5,000 ft. with panel antenna (included)
4.9 GHz to 6.0 GHz operation
UNII-5 ready
40 MHz / 20 MHz channel bandwidths
AES-256 encryption using RSA 1024 key exchange protocol
Manual and automatic frequency selection
Broadcast-capable
Multicast-capable up to 6 receivers

Specifications

Video Outputs:
12G-SDI SMPTE 2082-1 standard / 75 Ω (BNC x 2)
1 x HDMI 2.0 Type-A receptacle
Color Sampling:
SDI: YCbCr 4:2:2, 10-bit
HDMI: RGB 4:4:4, 8-bit | YCbCr 4:2:2, 10-bit
Delay Tx To Rx: <0.001sec
Bonding

Bonding: No
Supported Resolutions

Supported Resolutions:
4Kp23.98/24/25/29.97/30/50/59.94/60
1080p23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p50 576p59.94/60
480i(NTSC)/576i(PAL)
Video Processing

Video Compression: Uncompressed
Video Format Conversion Support: Yes, Framerate and Resolution Scaling
Audio Processing

Audio Format: 48kHz 24-bit PCM
Outputs

Audio Output: Embedded SDI/HDMI Audio Output (2 Channel)
Physical

Dimensions: 133.74mm x 139.2mm x 30.10mm (5.3” x 5.5” x 1.2”)
Weight: 23 oz (656g)
Construction: Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability: Multiple mounting options with 1/4"x20 and 3/8"x16 holes
Network

Antennas: 5 External 2 dBi antennas (included)
Wireless:
Licensed Frequencies*:
4.850 ~ 5.150 GHz
5.350 ~ 5.470 GHz
5.850 ~ 5.925 GHz
Unlicensed Frequencies:
5.150 ~ 5.250 GHz (Non-DFS)
5.250 ~ 5.350 GHz (DFS)
5.470 ~ 5.725 GHz (DFS)
5.725 ~ 5.850 GHz (Non-DFS)
*By using this product in the licensed frequencies, you acknowledge and agree to comply with all applicable regulations and rules, and to only operate this system in compliance with the applicable license requirements.

RF Channel Selection:
Auto, Manual
Manual available for DFS and non-DFS Channels
Encryption: AES-256, RSA-1024 key exchange
RF Power: 17 dbm EIRP (one external 2dBi antenna) (<51mW transmit power)
Range: Up to 5000 ft line of sight (using Panel Antenna on RX)
Unicast Multicast: Can connect one transmitter to up to 6 receivers
Noise Rejection:
Can coexist with WiFi and 5GHz cordless phones
Can operate up to 6 sets in same location
Power

Power Input: 2-Pin circular locking connector 6-28V DC
Battery: Gold or V mount battery plate
Nominal Power Consumption: 15 Watts
Environmental

Operating Temperature: 0-40℃