Attenzione: Ultimi articoli in magazzino!
This Tally Technologies Wireless Pro Bundle comes with everything you need for your production and broadcast studios, with a TallyTec Pro Wireless Base4 Transmitter and three Wireless Pro Receivers, including TimeSync.
The TallyTec Base4 Transmitter can support up to 4 channels for receivers, giving a wireless range of up to 2km. Powered through mains or 12v battery, this robust transmitter continuously outputs both live and preview signals from a wide variety of mixers to a receiver.
The case of the TallyTec Base4 incorporates a small screen for displaying the receiver status, an alarm button with a flashing light should a receiver deactivate, and a menu for managing the remote receivers. The transmitter also displays the battery charge level for each wireless receiver in use. The rear of the case has x4 RJ45 ports that can be used for charging the receiver and for use with wired receivers via Cat5/6 cable. The Base4 transmitter manages up to 4 receivers. The transmitter also has the ability to operate with any vision mixers using open/closed contact or +5v or -5v.
The transmitter receives information from a mixer's PGM output and sends a pulse to turn on the red LED on both the front and back of the receiver assigned to this camera. If the mixer also generates information from the selected camera's preview channel. The Base4 also transmits this channel and turns a green LED on located at the back of the receiver. The green LED can be switched off at any time if required.
The TallyTec Pro Wireless Receiver mounts easily to a camera cold shoe, steadicam, crane, jib and many more. Connected wirelessly back to the transmitter, the receiver has a range of up to 2km. The receiver provides both a green preview tally light and a red live tally light at the front and rear. The front tally lights can be turned off when required.
The wireless receivers are charged through the RJ45 when connected to the transmitter; once charged, the receiver can work up to 2 days on a single charge. The transmitter will give a warning signal when the receiver battery is low.
Now with added TimeSync which will give you a synced timecode for your camera or external recorder to sync all clips together in your timeline without any fuss. The receiver comes in a professionally finished, lightweight, tough case with standard screw thread for mounting.
Compatible with most mixers
Management of the Tally Program and Preview on mixers which support both functions
Supports up to 4 receivers
4 Channels supported in the 866/915MHz transmission waveband
2km wireless range
Powered through mains or 12V battery
Compatible with any vision mixer using open/closed contact or +5v or -5v
Wireless Receiver with TimeSync
Sleek, lightweight design
Wireless receiver mounts easy onto the camera cold shoe, steadicam, crane, jib etc
Provides both a green preview tally light and red live tally light at rear and front
Front tally lights can be switched off when necessary
Tough case with standard screw thread for mounting
Now with added TimeSync
Transmitter Weight: 1.5kg
Transmitter Dimensions :25x31x6cm (9.8x12.2x2.6")
Transmitter Channels: Wireless: 4 Channels- Wired:4 Channels
Transmitter Range: 2km
Transmitter Power:Mains- 12V Battery
Transmitter Ports: x4 RJ45
Receiver Weight 0. :0,5kg
Receiver Dimensions: 25x17x6cm (9.8x6.6x2.3")
Receiver Mount: Standard Screw Mount
Receiver Range: 2km
INCLUDED IN BOX :
x1 Pro Base4 Wireless Transmitter
x1 USB Cable
x1 Power Supply
x3 Wireless Receiver
x3 Cat 5/6 Charging Cable
x3 Extension LED Cable
Non ci sono commenti dei clienti per il momento.
Skaarhoj Micro Series - Micro Smart H Ethernet Controller, this “Micro” is...
Skaarhoj Micro Series - Micro KP01 Ethernet Controller, This “Micro” talks to...
Skaarhoj Micro Series - Micro Audio testing, testing, 1, 2, 3, his is a basic...
Skaarhoj Micro Series - Micro Levels Ethernet Controller read-out for any...
Skaarhoj Micro Series - Micro Monitor Ethernet Controller, sometimes you just...
Skaarhoj C31 Pocket Controller, The C31 Pocket Controller is one of the most...
Skaarhoj Camera Control for BMD Cameras we are proud to present the new...
ATEM CCU Lite Panel for Blackmagic Cameras Pure master black and iris control...
Skaarhoj E201-M16 Desktop Control for ATEM live production switchers, simple...
Skaarhoj C15 MII Remote Compatible with Panasonic PTZ Cameras, The C15 MII...
Skaarhoj E21-CMB6 MII Desktop Controller for ATEM 10 source select buttons,...
Skaarhoj E201-L Control Panel for ATEM Switchers and Broadcast Gear from...
SKAARHOJ XC2 Master Modular Desktop Controller 12 RGB buttons, Programmable...
SKAARHOJ XC3 Master Modular Desktop Controller 26 RGB buttons, Programmable...
SKAARHOJ XC5 Controller Desktop Modulare 8 Pulsante soft RGB, superficie di...
SKAARHOJ XC6 Master Modular Desktop Controller 24 Pulsante RGB Soft e 15...
SKAARHOJ XC7 Master joystick a 4 assi, 4 pulsanti RGB e OLED, superficie di...
Lo ShuttlePRO V2 per EDIUS 9 (anche per EDIUS 8) è uno strumento di grande...
Superficie di controllo programmabile Master SKAARHOJ MC3 con barra a T,...
Il SKAARHOJ C90R Rack Controller è un controller rack multiuso con un design...